Muskegon Practice Sessions
Moderator: Admin
- Ian_McAllister
- Town Member
- Posts: 391
- Joined: Fri Oct 22, 2004 5:30 pm
- Location: Final Haven
- Contact:
Muskegon Practice Sessions
Ok boys and girls, lets just use this thread to keep track of upcoming practices.
Well after the crappy weather this last week, I hope next Saturday will be gorgeous, cause I need some practice.
Anyone not wanting or able to make it this next saturday?
Well after the crappy weather this last week, I hope next Saturday will be gorgeous, cause I need some practice.
Anyone not wanting or able to make it this next saturday?
Your Knowledge cannot save you,
Your Magic cannot save you,
Nothing can save you!
Your Magic cannot save you,
Nothing can save you!
- Claude du Sinjin
- Town Member
- Posts: 321
- Joined: Mon Sep 13, 2004 3:48 pm
- Location: Cocytus
- Donovan Thynedar
- Town Member
- Posts: 628
- Joined: Tue Sep 23, 2003 2:18 am
- Location: With his beloved at the end of all things.
- Contact:
- Dereck_Sandoval
- Regular Visitor
- Posts: 48
- Joined: Wed Feb 16, 2005 11:16 am
- Location: In an urn next to olan's cot
- Kalphoenix
- Town Member
- Posts: 817
- Joined: Sun Mar 27, 2005 11:45 pm
I actually have Saturday off (WOW), so I should PROBABLY be able to show up for a bit if it's decent weather. Maybe if I don't feel uber-crappy, someone can teach me the finer points of using a spear, since that will be my weapon of choice in the future, if I ever make the damn thing, that is.
P.S- If anyone can find me a good instructional on how to make one, please point me in that direction. I can be fairly crafty with ideas, it's the implementation that gets me.
P.S- If anyone can find me a good instructional on how to make one, please point me in that direction. I can be fairly crafty with ideas, it's the implementation that gets me.
Mike: For the majority of you, choosing to use a packet instead of a weapon is a hindrance because your aims suck.
Travis: Crap he is on to me.
Travis: Crap he is on to me.
- Dewy Stoutbringer
- Regular Visitor
- Posts: 33
- Joined: Wed Apr 20, 2005 10:50 am
I maybe can come this weekend.
WHat time and where is the practice?
As long as I'm home by 5pmish I should be able to come and hang out/ fight with you all.
Jim
As long as I'm home by 5pmish I should be able to come and hang out/ fight with you all.
Jim
I saw a werewolf drinking a pina colada at Trader Vic's
His hair was perfect
--Warren Zevon
His hair was perfect
--Warren Zevon
- Dewy Stoutbringer
- Regular Visitor
- Posts: 33
- Joined: Wed Apr 20, 2005 10:50 am
McGraft Park @ NOON?
Same time and place? I re-read old posts to find this info.
JIm
JIm
I saw a werewolf drinking a pina colada at Trader Vic's
His hair was perfect
--Warren Zevon
His hair was perfect
--Warren Zevon
Go to Home Depot, Lowes, or Micheals and get a piece of 1/2" Bamboo with a thick wall. Try to get a piece as straight as possible. Make sure there are no weak points.Kalphoenix wrote: P.S- If anyone can find me a good instructional on how to make one, please point me in that direction. I can be fairly crafty with ideas, it's the implementation that gets me.
Take some strapping tape (The clear Kind with little strings in it) and wrap the bamboo in it by running just a single layer of tape length wise down the bamboo (So threads in the tape run the full length of the bamboo). Leave one end of the bamboo un-taped (this should be the length of your spear head -3 inches). Plug that end of the bamboo tightly with some spare foam (leave a 1/4" or so of the foam plug extending beyond the bamboo)
Make your spear head out of 6 layers of 1/4 inch foam (Camp pad). Make sure to leave a slit 1/2 wide to about 3 inches from the tip in the center 2 layers so the bamboo can fit inside the head. Also make sure the layers are firmly glued together with spray adhesive. (Note: The ideal situation would be to use 3 layers of 1/2 foam but I know that is hard to get)
Cover the spear head in Tape or Fabric. I think I would go with fabric if the shape of the head is pretty simple otherwise I would just tape it. Make sure not to cover the hole where it will slide onto the bamboo.
Epoxy the Spear head onto the end of the bamboo that is plugged with foam and does not have tape. Make sure it is firm.
Get a piece of 1/2" Pipe insulation (The green or Tan kind with a 5/8" wall) in a six foot length. I have found these at several ACE Hardware stores. Cut a notch in the foam at one end so it can slide over the spear head by a few inches (depending on your aesthetic needs). The overlapping foam can be carved down abit so it looks better. Smear the bamboo with epoxy and slide on the pipe insulation. You may have to twist and push a bit for the bamboo to fit through. It is wise to make sure the bamboo fits well before applying the epoxy.
When the epoxy has dried, cut the foam so there is about an inch of foam beyond the butt end of the bamboo. Pack this space tight with some foam. Place a little tape over the hole so the foam doesnt fall out. Cover the foam on the spear shaft with either tape or cloth and you are done. The covering where the spear shaft and head overlap could be tricky if you use cloth. I've never tried it so if you do....good luck.
If you dont want to worry about the looks of your spear, you can skip making a spear head all together and just cover the whole thing in pipe foam. Then, just cut a 18" length of the pipe foam in half and wrap it length wise on one end of the foam covered bamboo (so about 9" is on one side and 9" are on the other side) This will make a phallic shaped "spear Head")
Edit: Also, you can go to http://www.dagorhir.org/howto/DagorhirSpear.html for instructions on making a Dagohir Spear. They are pretty straight forward to make but heavy as Hell. You may be able to use their "Football" spearhead method with a 1/2" bamboo shaft with good results
Wayne O
The Game Master Lite
Frag the weak, Hurdle the dead!
The Game Master Lite
Frag the weak, Hurdle the dead!
- Onimaster
- Town Member
- Posts: 3013
- Joined: Thu Jul 22, 2004 12:22 am
- Location: Grand Haven, Michigan
- Contact:
When you find the bamboo let me know where. I have tried 3 stores and so far none carry bamboo or at least not close to the right size.WayneO42 wrote:Go to Home Depot, Lowes, or Micheals and get a piece of 1/2" Bamboo with a thick wall. Try to get a piece as straight as possible. Make sure there are no weak points.
Vaal Draconus,
Dwarven King
Survivor of the Dreaming
& Champion of Life.
or
Nikolai Petrov,
Traveling Cossack Sage
Dwarven King
Survivor of the Dreaming
& Champion of Life.
or
Nikolai Petrov,
Traveling Cossack Sage